Introduction of high Mast pole High pole light: Generally refers to a new type of lighting device consisting of a steel column type pole and a high power combined lamp holder of 15-25 meters. It consists of a lamp cap, an internal lamp electrical, a rod body and a base part. The shape of the lamp head can be determined according to the user's requirements, the surrounding environment and the lighting needs; the internal lamps are mostly composed of floodlights and floodlights. The light source...
The high pole lamp generally refers to a new type of lighting device composed of a steel column type pole and a high power combined lamp holder of 15 meters or more. It consists of a lamp cap, an internal lamp electrical, a rod body and a base part. The shape of the lamp head can be determined according to the user's requirements, the surrounding environment and the lighting needs; the internal lamps are mostly composed of floodlights and floodlights. The light source adopts NG400 high-pressure...
Various cases and analysis of incomplete penetration Incomplete penetration refers to defects caused by the fact that the base metal does not melt and the weld metal does not enter the joint. According to the welding method of the welded parts, the roots are not welded and the middle is not welded. The root is not welded because the liquid weld metal does not enter the blunt edge of the root, and most of it exists in the single-sided welding of the V-shaped or U-shaped groove. The middle is not...
Material | Q345A, Q345B, Q345C, Q345D, Q345E steel performance difference? Q345 is a material of steel. It is a low alloy steel (C<0.2%) and is widely used in construction, bridges, vehicles, ships, pressure vessels, etc. Q represents the yield strength of this material, and the latter 345 refers to the yield value of this material, around 345 MPa. And the yield value decreases as the thickness of the material increases. Q345 has good comprehensive mechanical properties, good low temperature...
In the construction of steel structure engineering, the welding deformation directly affects the installation and use functions of steel components and steel structures. And the additional bending moment, secondary stress, etc. generated during the load will indirectly affect the performance of the steel structure engineering, so the control of welding deformation is very important. According to the causes and influencing factors of welding deformation, the following misplaced control...
Powder Coated use for Steel pole surface As you know the powder use for wide industry like building outside surface beautiful,anti-rust,and the ship boat,But We would like recommending is the different color powder use for steel pole,Like lighting pole,signal pole,monopole etc. As you know after the steel pole fabrication by hot dip galvanized for anti-rust,But still can not satisfy with clients requirements for decoratiion,So We recommendation clients use spray powder coated to instead of...
![[New Power Fastener Standard] Hot Dip Zinc Bolt for Power DL/T 284-2012](http://i.bosscdn.com/blog/20/14/05/140844286101.jpg)
Hot Dip Zinc Bolt [New Power Fastener Standard] Hot-dip galvanized hexagonal thin nut for power DL/T 284-2012 [New Power Fastener Standard] Hot Dip Zinc Nut for Power DL/T 284-2012
The main design flaw of flat-welded flanges is that it does not guarantee zero leakage. This is its design deficiencies: the connection is dynamic, and periodic loads such as thermal expansion and undulation, can cause movement between the flange faces, affecting the function of the flange, thereby compromising the integrity of the flange and eventually leading to leakage. Any product can not be without defects, but try to control the product to the minimum, so the company in the production of...
News Related Keywords: Gas Welding 1. Electrowelding and gas welders are all special operations. They should be qualified for physical examination. They can be independently operated after they have passed the professional safety technology study, training and examination, and received the “Special Type of Operation Certificate”. 2. Special oxygen and acetylene bottle storage warehouses must be built on site and equipped with corresponding fire-fighting equipment. “No smoking” logo should be...
The galvanizing pole divided into hot-dip galvanizing and cold galvanizing. The hot-dip galvanizing melts the zinc, and then the pole passes through the zinc liquid to form a galvanized layer on the surface. The cold galvanizing is that the plating is the steel. Put into the electrolyte containing zinc, electrify and electroplating, so that zinc is deposited on the surface of the plating layer, its zinc content is very low. Firstly, from the appearance of the pole the surface of the hot-dip...
Affected by factors such as rapid release of production capacity in January and February and high steel inventories, steel prices fell significantly in March, but such momentum is expected to be reversed. China Iron and Steel Industry Association released a monthly analysis report on April 19, saying that with the arrival of the peak consumption season, increased inflationary pressures and increased demand in the international market, steel prices in the latter period will rise slightly. The...
Steel Pole Industry about Selection of Q235B and Q345B Q235B and Q345B materials are commonly used in track-type bulldozers. Under the premise of meeting the design requirements, Q345B is used instead of Q235B to reduce costs. Firstly, the chemical composition and mechanical properties of the two materials are compared, and then the welding process test of the same welding parameters is carried out, and the obtained test data is analyzed, and the Q235B material is replaced by reducing the...
Compared with other welding methods, gas shielded welding has the following characteristics: (1) The visibility of the arc and the molten pool is good, and the welding parameters can be adjusted according to the condition of the molten pool during the welding process. Gas shielded welding machine (2) The welding process is easy to operate, there is no slag or very little slag, and there is basically no need to clean the slag after welding. Overview Gas shielded welding is a method of arc...
The pole part 1 and the pole height are 15-45 meters, the lamp panel is a frame structure; the bottom flange is circular. High pole light detailed technical description First, the adoption of standards: High pole lights comply with the corresponding national standards (GB) or International Electrotechnical Commission standards (IEC). And implement the latest version of national standards, international standards, and industry standards. "Code for Design of Steel Structures" GBJ9-1987,...
With the strong promotion of the national initiative, the Shangchai power engine has maintained rapid growth in overseas markets. Under the continuous promotion of the national “Belt and Road Initiative”, the performance of Shangchai Power Engine in overseas markets is obvious to all, and the quantity of possession is growing rapidly. Performance of Shangchai Power Engine in overseas markets As a company that produces good products for users and provides good services to users, Shangchai knows...
Steel pipe knowledge: 45 # steel pipe and 40Cr steel quenched and tempered heat treatment process quenching and tempering is a double heat treatment of high temperature tempering, its purpose is to make the workpiece has a good overall mechanical properties. Quenched and tempered steel has two types of carbon quenched and tempered steel and alloy quenched and tempered steel. Whether it is carbon steel or alloy steel, its carbon content is controlled more strictly. If the carbon content is too...
Protection measures for street light poles On the installed street lights, the solar street light poles are completely exposed to the outside. Therefore, in order to prevent it from being corroded, it is necessary to have certain protective measures. Keywords: street light, street light protection, street light pole So what kind of protective measures are beneficial to street light poles? In the final analysis, the fatal injury of solar street light poles is surface corrosion, so what we have...
Abstract Recently, the domestic iron ore market as a whole has been running smoothly. Some regions have retraced their prices, and the transaction is slightly light. The trend of the imported ore market remained stable, and the enquiry increased, but the market transaction picked up. The domestic billet market has a strong wait-and-see attitude, with a range of 10... Recently, the domestic iron ore market as a whole has shown a steady operation trend, and some regions have retraced their...
1. The main solar energy garden light pole adopts one-time forming technology. The steel rod weld seam is required to be smooth and smooth. The flat part of the whole light rod body weld protrusion and the rod body should be no more than 1mm. The pole welding is automatic sub-arc welding. The coloring flaw detection has reached the requirements of the international welding standard, and the lamp pole socket method is fixed by using nails and top wires; 2. The anti-corrosion treatment method of...
The galvanized chain link network is divided into a hot-dip galvanized chain link network and a cold galvanized chain link network. The difference between the two is: hot-dip galvanizing is the immersion of zinc in hot liquids, production speed, coating thickness, but Not uniform, the market allows a minimum thickness of 45 microns to 300 microns. Hot-dip galvanized chain linking nets are placed in liquid zinc in a manner of high-temperature heating. A series of chemical reactions take place at...
1. The light pole is mainly divided into two categories: conical and polygonal pyramidal. For a conical light pole, the roundness error of the section should not exceed 5 ‰. For polygonal pyramidal light poles, the deviation between the opposite side and the diagonal spacing should be less than 1%. The distortion of the single pole face of the lamp pole shall not exceed 7°. 2. The straightness error of the pole axis should not be greater than 2杆 of the length of the pole. 3. The design of the...
High Voltage Power Pole use flat rack Container Loading FuTao company near the end of the plant is also the busiest time, an average of 10 containers to be loading every day Welcome all of clients to inquiry! We Can according to your requirements free design.
Color Temperature(CCT): 3000k/4000k/5000k Lamp Power: 150W 250W 400W Average Life: 10 Years Guarantee IP Rating: IP65 Voltage: 110V 220-240V Light Source: Sodium Lamp/Metal Halide Lamp Lamp Body Material: Galvanized Steel Q345 S355 A36 Power Supply: AC Application: Highway, Square, Garden, Street, Roadway, Sidewalk, Footpath Certification: CE, RoHS, CCC, UL, ISO, FCC, EMC, GS Height: 6m, 8m, 10m, 11.8m Specification: CE, SGS, ISO
Application: Square Type: Polygonal Surface: Hot DIP Galvanized or Painted MOQ: 1 Set Specification: 25m 30m 35m Certification: SGS, ISO, CE Material: Steel Name: High Mast Shape: Polygonal Welding Standard: Aws D1.1 Galvanization: ASTM A123 Transport Package: by Sea with Old Blanket Packing
ส่งคำถาม
Ms. amily li
โทร:86-0510-87871161
Fax:86-0510-87871942
โทรศัพท์มือถือ:+860086-13665163520
อีเมล:sale@chinasteelpole.com
ที่อยู่:NO.8,NANXING EAST RD,HEQIAO TOWN,YIXING, Wuxi, Jiangsu
เว็บไซต์โทรศัพท์มือถือ
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
